Pfandlhof
780 m · Berchtesgaden / Chiemgauer Alps · AT
You can walk to 3 huts from here in a day, listed below with times and grades, and we read the calendars of 27 huts in this network daily, so a multi-night route through here can be checked night by night.
Pfandlhof is an alpine hut at 780 m in the Berchtesgaden / Chiemgauer Alps, AT. 3 other huts can be reached from here on foot in a day.
How to book
You book Pfandlhof directly with the hut. HutScanner is a planning tool and does not take bookings or hold beds.
Or contact the hut directly: [email protected], +43 5372 62 118.
Walkable from here
- Gasthaus Veitenhof - 0h26, 1.13 km, +75 m
- Ritzaualm - 1h00, 2.06 km, +390 m
- Anton-Karg-Haus - 2h09, 5.96 km, +210 m
Times are estimates for an average fit hiker - terrain and conditions vary. Grades are the SAC hiking scale, judged the way the app judges them: the hardest ground that runs far enough to characterise the leg.
About Berchtesgaden / Chiemgauer Alps
106 huts connected by 663 walking routes in the Berchtesgaden / Chiemgauer Alps massif.
Planning a route through Pfandlhof
Booking one hut is the easy half. The work is the chain: every night needs a bed, at a hut you can walk to from the one before, on consecutive dates, and one full night sends you back to the start. From Pfandlhof there are 3 onward huts within a day's walk, listed above, inside a Berchtesgaden / Chiemgauer Alps network of 106 huts. HutScanner searches that network for a sequence that works on your dates, rather than leaving you to try the huts one at a time.
Pfandlhof books online but publishes no calendar HutScanner can read, so a route through it is planned around the 27 huts in Berchtesgaden / Chiemgauer Alps that do publish one, and this night is confirmed with the hut itself. Plan a multi-night route from Pfandlhof.
If you plan trips through ChatGPT or Claude, they can run this same search for you without opening the app, over the regions HutScanner has reviewed by hand. How that works is described in using HutScanner with AI assistants, and the endpoint is documented in the OpenAPI spec.