Open in the HutScanner map

Saent/Dorigoni Silvio

2436 m · sleeps 65 · Ortler / Stelvio · IT

You can walk to 8 huts from here in a day, listed below with times and grades, and we read the calendars of 13 huts in this network daily, so a multi-night route through here can be checked night by night.

Saent/Dorigoni Silvio is an alpine hut at 2436 m in the Ortler / Stelvio, IT. 8 other huts can be reached from here on foot in a day.

How to book

You book Saent/Dorigoni Silvio directly with the hut. HutScanner is a planning tool and does not take bookings or hold beds.

Open the booking system for this hut

Or contact the hut directly: [email protected], +39 0463 985107.

Walkable from here

Times are estimates for an average fit hiker - terrain and conditions vary. Grades are the SAC hiking scale, judged the way the app judges them: the hardest ground that runs far enough to characterise the leg.

Plan a route from this hut

See the whole Ortler / Stelvio network

About Ortler / Stelvio

64 huts connected by 335 walking routes in the Ortler / Stelvio massif.

Planning a route through Saent/Dorigoni Silvio

Booking one hut is the easy half. The work is the chain: every night needs a bed, at a hut you can walk to from the one before, on consecutive dates, and one full night sends you back to the start. From Saent/Dorigoni Silvio there are 8 onward huts within a day's walk, listed above, inside an Ortler / Stelvio network of 64 huts. HutScanner searches that network for a sequence that works on your dates, rather than leaving you to try the huts one at a time.

Saent/Dorigoni Silvio books online but publishes no calendar HutScanner can read, so a route through it is planned around the 13 huts in Ortler / Stelvio that do publish one, and this night is confirmed with the hut itself. Plan a multi-night route from Saent/Dorigoni Silvio.

If you plan trips through ChatGPT or Claude, they can run this same search for you without opening the app, over the regions HutScanner has reviewed by hand. How that works is described in using HutScanner with AI assistants, and the endpoint is documented in the OpenAPI spec.