Refuge Giacoletti
2741 m · sleeps 60 · Italy · Alpes-cotiennes network
You can walk to 1 hut from here in a day, listed below with times and grades, and we read the calendars of 9 huts in this network daily, so a multi-night route through here can be checked night by night.
Refuge Giacoletti is an alpine hut at 2741 m in Italy, reached from the Alpes-cotiennes network. 1 other hut can be reached from here on foot in a day.
How to book
You book Refuge Giacoletti directly with the hut. HutScanner is a planning tool and does not take bookings or hold beds.
Or contact the hut directly: +39 0175 940104.
Walkable from here
- Refuge Quintino Sella - 2h17, 6.66 km, +524 m
Times are estimates for an average fit hiker - terrain and conditions vary. Grades are the SAC hiking scale, judged the way the app judges them: the hardest ground that runs far enough to characterise the leg.
About the Alpes-cotiennes network
Refuge Giacoletti is in Italy. It is routed in our Alpes-cotiennes network, which is why it is listed here: the walking times above come from that network.
16 huts connected by 22 walking routes in the Alpes-cotiennes massif.
Planning a route through Refuge Giacoletti
Booking one hut is the easy half. The work is the chain: every night needs a bed, at a hut you can walk to from the one before, on consecutive dates, and one full night sends you back to the start. From Refuge Giacoletti there is 1 onward hut within a day's walk, listed above, inside an Alpes-cotiennes network of 16 huts. HutScanner searches that network for a sequence that works on your dates, rather than leaving you to try the huts one at a time.
Refuge Giacoletti books online but publishes no calendar HutScanner can read, so a route through it is planned around the 9 huts in Alpes-cotiennes that do publish one, and this night is confirmed with the hut itself. Plan a multi-night route from Refuge Giacoletti.
If you plan trips through ChatGPT or Claude, they can run this same search for you without opening the app, over the regions HutScanner has reviewed by hand. How that works is described in using HutScanner with AI assistants, and the endpoint is documented in the OpenAPI spec.